High Pressure 3000 Liter ASME Carbon Steel Compressed Air Receiver Storage Tank

Product introduction It is used to store air and buffer, avoid frequent loading and unloading of air compressor and remove most of liquid water. It is mainly used with air compressor, freezing dryer, filter and other equipment to form the power source of industrial production-compressed air station. Selection of air storage tank The role of the air storage tank in the air compression system is: buffering, making the air supply more stable and reducing the frequent start-up of the air compressor. At the same time, the precipitation of compressed air in the air storage tank is more conducive to water and dirt removal. The basic requirements for gas storage tank selection are as follows: 1. The volume of the gas storage tank should be between 10% and 20% of the compressor’s displacement. We generally choose 15%. When the gas consumption is large, the volume of the gas storage tank should be appropriately increased. If the gas consumption on site is small, it can be lower than 15%, and it is better not to be lower than 10%. 2. The handling capacity of dryer and filter should be consistent with the displacement of compressor. 3. The filter before the dryer should be equipped with an automatic drainer. 4. When using the adsorption dryer, the compressor should reserve the corresponding gas consumption. Sweet makeup: 5. After the dryer is installed in the air tank, the air tank can fully play the role of buffering, cooling and sewage discharge, which can reduce the load of the dryer and be used in the condition of uniform air supply of the system. Before the dryer is installed in the air storage tank, the system can provide a large peak regulation capacity, and it is mostly used in the working condition with large gas fluctuation.